How to clean your hot tub

Hot tub cleaning products: descaler, all-purpose cleaner and dish soap
(from left) SAFE descaler, SAFE all-purpose cleaner, Mayeri hypoallergenic dish soap

The secret to a long-lasting plastic hot tub liner is regular cleaning – it keeps every soak pleasant and clean. Regular washing also prevents dirt from building up, which would otherwise mean a longer, more tedious clean, so it saves you valuable time. Always follow the manufacturer’s cleaning recommendations to care for the liner properly!

Regular cleaning keeps maintenance easy

In our experience, plastic-lined hot tubs are best cleaned with a microfibre cloth – it removes dirt effectively without damaging the liner. Remember that abrasive cleaners scratch plastic, making it easier for dirt and limescale to stick and harder to clean!

Depending on water hardness and how dirty the tub is, you can use mild cleaning agents (dish soap works too). We wash our hot tub after every use with SAFE surface cleaner made from 100% natural ingredients, which is also safe for the environment as the rinse water ends up in the ground. If you can drain the rinse water into a sewer, use any suitable cleaner. Repeat if needed.

For a nice finish, dry the liner with dry microfibre cloths after washing – it stays evenly clean with no water marks.

Tricks for removing limescale

Depending on water hardness, limescale tends to build up over time around the jets and at the usual water line. We use SAFE descaler, but diluted citric acid or vinegar work perfectly too. The latter two are especially good for a deeper clean, if you haven’t cleaned the jets in a while or a lot of limescale has built up.

If the jet nozzles are removable, take them out and put them in a container big enough to hold them all. Mix citric acid or vinegar into hot water (rather strong than weak) and soak the nozzles. Let them sit for about 10 minutes, then scrub the small gaps clean with a small brush (an old toothbrush works).

These products usually get the hot tub super clean! Depending on the amount of limescale, you may need to repeat. We recommend descaling regularly, depending on your water hardness and the condition of the tub.

Don’t forget to flush the water jacket

To flush the water jacket thoroughly, fill it with water. Block the lower opening (for example with a cloth), push a hose into the upper opening and fill the jacket. When water starts coming out of the upper pipe, the jacket is full. Remove the cloth from the lower opening and let the water drain out. Repeat until only clean water comes out of the lower opening.

Summary

Clean your hot tub regularly – it’s easier to clean each time and more enjoyable to use when you know it’s been cleaned well. And if cleaning isn’t your thing: when you rent a hot tub from us, simply letting the water out is enough – we take care of the thorough cleaning to ensure consistent quality for every rental.